| |
|
|
| |
Supported Hardware |
|
| |
|
|
| |
 |
The HLImage++ DirectX Picture tool was written to support 'any'
imaging hardware that supports DirectShow and that ships with a WDM
DirectShow driver.
HLImage++ also has a 1.30 DCAM Picture tool that works with a HLI++
supplied 1.30 DCAM driver for excellent support of any 1.30 and later
DCAM 1394a or 1394b camera.
|
 |
|
| |
The Picture Tools have been tested successfully with
multiple USB and 1394a/b cameras such as: Sony, Hitachi, Unibrain, and
several USB frame grabbers. If using USB Cameras or
Frame grabbers, each device will have its own driver that is supplied
by the manufacturer of the device. There are two basic ways to install
such drivers for use with HLImage++. Download the following two
step-by-step install documents to help you install your drivers. |
|
| |
Generic Driver Install |
Driver with Driver Install Program |
|
| |
If you have a 1.30 DCAM or later camera, you do not need to get the
driver from the manufacturer as you will use the supplied HLI++ DCAM
driver. If you are using a USB or 1394 camera and wish to use it
with DirectShow, you will also need the manufacturers driver. Click on
the links below to see step-by-step examples of how to install such
drivers. |
|
| |
Sony FireWire Camera Driver |
Sony
Driver setup instructions (in pdf) |
|
| |
|
|
| |
 If you're on a limited budget, USB 2.0 Frame Grabbers provide an
excellent solution with a standard NTSC, PAL, or S-Video type camera. For
example, the S928 grabber provides a wonderful image over a simple USB
2.0 port. Since it ships with a DirectShow driver, you're all set for
under $75.00. Call us if you're on a limited budget and see if you
qualify for a HLImage++ S928 combo. Download the following two
step-by-step install documents to help you install the drivers for the
S928 and similar devices. |
|
| |
Generic Driver Install |
Driver with Driver Install Program |
|
| |
|
|
